Magnetic compensation analytical balances: ETERNITY 100 SMI
FUNCTIONS AND CHARACTERISTICS
- Large, easy-to use graphic display
- Reading in grams or milligrams with reduced decimal places and other measurement unit
- Bar graph with display of the full scale percentage used
- Counting of homogeneous pieces
- Calculation of percentage
- Standard deviation
- Density of solids/liquids
- Selection of display language Italian/English
- Autocalibration every 3 hours or temperature depending and/or calibration with external masses
- Indication of stable weight achievement
- Fast/slow selection response time
- Access for weighing below the floor of the balance
Description
DESCRIPTION
FUNCTIONS AND CHARACTERISTICS
- Large, easy-to use graphic display
- Reading in grams or milligrams with reduced decimal places and other measurement unit
- Bar graph with display of the full scale percentage used
- Counting of homogeneous pieces
- Calculation of percentage
- Standard deviation
- Density of solids/liquids
- Selection of display language Italian/English
- Autocalibration every 3 hours or temperature depending and/or calibration with external masses
- Indication of stable weight achievement
- Fast/slow selection response time
- Access for weighing below the floor of the balance
| Capacity | 120 g |
|---|---|
| Readability | 0,1 mg |
| Linearity | ± 0,2 mg |
| Repeatability | ± 0,05 mg |
| Response time | 3/6 sec. |
| Data output | I/O RS232 adjustable |
| Pan dim. (mm) | Ø 80 |
| Calibration | Esternal, Internal |
| Operating temperature | 10° ÷ 30°C |
| Power | 100 ÷ 240 VAC |
| Absorption | 200 mA |
| Dimensions (W x D x H) | 216 x 380 x 360 mm |
| Weighted room size (W x D x H) | 190 x 180 x 240 mm |
| Net weight (kg) | 7 |
| Note | The CAL model has the Internal calibration |
ON REQUEST
- Liquids and solids density measuring devices
- Remote command to activate various signals: print, tare, etc.
- Executions with special capacity
- Printer: DP24T-SER; software SCALE COMM
DATA SHEET ETERNITY ENG Rev 2.pdf
