Hydrostatic Balance: MIA 2020 BASIC

Fully automatic densimeter for determination of Alcoholic Strength by Volume (ASV) on the distillate.

This product is currently out of stock and unavailable.

SKU: MIA/2020/BASIC Category:

Description

Fully automatic densimeter for determination of Alcoholic Strength by Volume (ASV) on the distillate.

FUNCTIONS

The readout of the Alcoholic Strength by Volume is shown on a large graphic led screen simultaneously with the readout of temperature, density at 20°C and other parameters.

TECHNICAL FEATURES
  • Alcoholic strength by volume (ASV)
    Reading range: 0,1 ÷ 99,9% vol
    Readability: 0,1 % vol
    Repeatability: ±0,1% vol (between 15° and 25°C)
  • Density
    Relative density range: 0 5÷2,25 (d20/20)
    Readability: 0,0001
    Repeatability: ± 0,0002
  • Repeatability
    Type: Thermo probe in platinum Pt 100 1/3 DIN
    Readability: 0,05°C
    Repeatability: ±0,05°C (in the range 10÷30°C)
STANDARD EQUIPMENT
  • Power supply, 1 hydro repellent floater interchangeable in mass and volume, Accredia RMP certified hydroalcoholic solution, double wall cylinder.
Response time 6 sec.
Data output RS232 I/O
Calibration Internal
Operating temperature 10÷30°C (suggested 15÷25°C)
Power 100/240 Vac 50/60Hz
Absorption 10 VA
Dimensions (W x D x H) 210 x 370 x 380 mm
Net weight (kg) 8,5
Note Languages: Italian, English
ON REQUEST
  • Floaters with certificate, Accredia (Italian Accreditation Body) Certified Reference Material Hydroalcoholic solutions (5÷60%ASV)

INTERCHANGEABLE FLOATERS IN MASS AND VOLUME
A special care is devoted to the construction and calibration of the floaters.
They are all interchangeable in mass and volume to simplify their use; for example, it is possible to use two different floaters to determine the relative density of a must or a wine; so that sample pollution is avoided.
In order to achieve what mentioned before, the suspension wire realized with a non-magnetic and stainless material, with a diameter less or equal to 0.20 mm. and the superficial treatment of the floater’s glass were object of thorough studies to nullify the problems caused by the surface tension, by the wire’s own volume, and by the electrostatic charges.

DATA SHEET MIA2020BASIC ENG rev1